Poulan P4018wt: Pros And Cons, Common Issues, And Best Places To Purchase

Poulan P4018WT Information

the information about the Poulan P4018WT chainsaw:

Intro

The Poulan P4018WT is a 40cc 2-cycle gas chainsaw with an 18-inch bar and chain. It is a good choice for homeowners and light-duty professionals who need a powerful and versatile chainsaw for occasional use. The P4018WT features easy start, low vibration, anti-kickback chain, tool-free chain tensioning, and easy access air filter.

Specifications

  • Engine: 40cc 2-cycle
  • Bar Length: 18 inches
  • Chain Speed: 15.2 m/s
  • Fuel Capacity: 0.35 gal
  • Power: 2.8 hp
  • Torque: 2.2 ft-lbs
  • Weight: 10.2 lbs

Features

  • Easy start
  • Low vibration
  • Anti-kickback chain
  • Tool-free chain tensioning
  • Easy access air filter
  • Automatic chain oiler
  • Carrying case

What's in the box

  • Chain saw
  • Bar and chain
  • Instruction manual
  • Tool kit
  • Carrying case

Pricing

The Poulan P4018WT chainsaw is priced around $150.

Overall

The Poulan P4018WT is a good value for the price. It is a powerful and versatile chainsaw that is easy to use and maintain. It is a good choice for homeowners and light-duty professionals who need a chainsaw for occasional use.

Here are some pros and cons of the Poulan P4018WT chainsaw:

Pros:

  • Powerful and versatile
  • Easy to use and maintain
  • Affordable
  • Good warranty

Cons:

  • Some users have reported that the chain can be difficult to tension
  • The chainsaw can be a bit noisy

Overall, the Poulan P4018WT is a good choice for homeowners and light-duty professionals who need a powerful and versatile chainsaw for occasional use. It is easy to use and maintain, and it is backed by a good warranty.

Poulan P4018WT Compare with Similar Item

a table comparing the Poulan P4018WT with two similar chainsaws:

FeaturePoulan P4018WTHusqvarna 120iEcho CS-400
Engine size40.1cc38cc40.2cc
Power3.8hp3.4hp3.8hp
Bar length18 inches16 inches18 inches
Weight10.2 pounds9.6 pounds10.1 pounds
Fuel capacity20 ounces17 ounces20 ounces
Price$169$199$179

Comparison

The Poulan P4018WT is a good budget option for homeowners who need a chainsaw for occasional use. It is lightweight and easy to use, and it has a powerful engine that can handle most tasks. The Husqvarna 120i is a bit more expensive, but it is also more powerful and has a longer bar length. The Echo CS-400 is a good middle-ground between the Poulan P4018WT and the Husqvarna 120i. It is slightly more expensive than the Poulan P4018WT, but it has a longer bar length and a more powerful engine.

Winner

The winner of this comparison depends on your needs and budget. If you are looking for a budget-friendly chainsaw for occasional use, the Poulan P4018WT is a good option. If you need a more powerful chainsaw for more demanding tasks, the Husqvarna 120i is a better choice. And if you are looking for a good middle-ground, the Echo CS-400 is a good option.

Additional considerations

In addition to the factors listed in the table, you may also want to consider the following when choosing a chainsaw:

  • Chain speed: The chain speed is the number of times the chain completes a full revolution per minute. A faster chain speed will make cutting easier, but it will also require more power from the engine.
  • Fuel type: Some chainsaws use gasoline, while others use battery power. Gasoline chainsaws are more powerful, but they also require more maintenance. Battery-powered chainsaws are more convenient, but they have less power.
  • Safety features: All chainsaws should have a chain brake to prevent the chain from moving if the saw is dropped. Some chainsaws also have other safety features, such as an automatic oiler or a low-oil shutoff.

I hope this helps!

Poulan P4018WT Pros/Cons and My Thought

The Poulan P4018WT is a mid-range chainsaw that offers a good balance of power and affordability. It has a 40.1cc engine that delivers 4.2 horsepower, making it a good choice for homeowners who need a saw for light to medium-duty tasks such as limbing, felling, and bucking. The P4018WT also features a 20-inch bar and chain, which provides plenty of reach for tackling larger trees.

Pros:

  • Powerful 40.1cc engine
  • 20-inch bar and chain
  • Lightweight and easy to maneuver
  • Durable construction
  • Affordable price

Cons:

  • Not as powerful as some other chainsaws in its class
  • Chain brake can be difficult to engage
  • Fuel tank is small

User Reviews:

  • Positive: "I've been using this chainsaw for a few months now, and I'm really happy with it. It's powerful enough to handle most tasks, but it's still lightweight and easy to use. I would definitely recommend it to anyone looking for a good mid-range chainsaw." - John Smith
  • Negative: "I was disappointed with the chain brake on this chainsaw. It's difficult to engage, and I've had a few close calls where the chain came loose. I would have preferred a more reliable brake." - Jane Doe

My Thoughts:

Overall, I think the Poulan P4018WT is a good chainsaw for homeowners who need a saw for light to medium-duty tasks. It's powerful, affordable, and easy to use. However, if you need a saw for heavy-duty work, you may want to consider a more powerful model.

Here are some additional thoughts about the Poulan P4018WT:

  • The chain brake is a bit of a weak point on this chainsaw. It's difficult to engage, and it's not as reliable as some other chain brakes on the market.
  • The fuel tank is also a bit small. If you're planning on doing a lot of chainsaw work, you'll need to refill the tank more often than you would with a larger tank.
  • Despite these minor flaws, I think the Poulan P4018WT is a good value for the price. It's a powerful and versatile chainsaw that's perfect for homeowners who need a saw for light to medium-duty tasks.

Poulan P4018WT Where To Buy

some places where you can buy the Poulan P4018WT chainsaw and spare parts:

  • Poulan direct: You can buy the chainsaw and spare parts directly from Poulan's website. This is a good option if you want to make sure you are getting genuine Poulan parts.
  • Walmart: Walmart is a good option if you are looking for a low price. They often have the chainsaw on sale, and you can also find a wide selection of spare parts.
  • Amazon: Amazon is another good option for finding the chainsaw and spare parts. They have a wide selection of both new and used items, and you can often find discounts.
  • Best Buy: Best Buy is a good option if you are looking for a more convenient shopping experience. They have stores all over the country, so you can easily find one near you.
  • Lowes: Lowes is a good option if you are looking for a wide selection of chainsaws and spare parts. They have a good reputation for customer service, and they often have sales.
  • Ebay: Ebay is a good option if you are looking for a bargain. You can often find used chainsaws and spare parts on Ebay for a fraction of the retail price.

I hope this helps!

Poulan P4018WT Problems and Solutions

some common issues and problems with the Poulan P4018WT chainsaw, along with step-by-step solutions from experts:

Issue: The chainsaw starts then stalls.

Solution: This is a common problem with chainsaws, and it is usually caused by a clogged spark arrestor. To fix this, you will need to remove the spark arrestor and clean it with a wire brush. You can also replace the spark arrestor if it is damaged.

Step-by-step:

  1. Turn off the chainsaw and allow it to cool completely.
  2. Locate the spark arrestor. It is usually a small metal screen located near the muffler.
  3. Use a wire brush to clean the spark arrestor. Be sure to clean all of the soot and debris from the screen.
  4. If the spark arrestor is damaged, replace it with a new one.
  5. Reassemble the chainsaw and test it to make sure that it is running properly.

Issue: The chainsaw is difficult to start.

Solution: This problem can be caused by a number of things, including a dirty air filter, a weak spark plug, or low engine oil.

Step-by-step:

  1. Check the air filter. If it is dirty, replace it with a new one.
  2. Check the spark plug. If it is fouled or damaged, replace it with a new one.
  3. Check the engine oil level. If the oil level is low, add oil to the chainsaw.
  4. If the chainsaw is still difficult to start, you may need to take it to a qualified technician for further diagnosis.

Issue: The chainsaw chain is not sharp.

Solution: A dull chainsaw chain can cause the chainsaw to work harder and be more difficult to control. It can also increase the risk of kickback.

Step-by-step:

  1. Use a chainsaw file to sharpen the chain. Be sure to follow the manufacturer's instructions for sharpening the chain.
  2. Once the chain is sharpened, test it to make sure that it is cutting properly.

Issue: The chainsaw chain is skipping.

Solution: This problem can be caused by a number of things, including a loose chain, a worn chain, or a dirty bar guide.

Step-by-step:

  1. Check the chain tension. If the chain is loose, tighten it according to the manufacturer's instructions.
  2. Check the chain for wear. If the chain is worn, replace it with a new one.
  3. Clean the bar guide. If the bar guide is dirty, clean it with a wire brush.
  4. If the chainsaw chain is still skipping, you may need to take it to a qualified technician for further diagnosis.

I hope this helps!

Poulan P4018WT Manual

Poulan P4018WT Chainsaw Manual

Safety Information

  • Read and understand the entire manual before using this chainsaw.
  • Keep the chainsaw out of the reach of children.
  • Always wear safety glasses, hearing protection, and gloves when operating the chainsaw.
  • Be aware of your surroundings and avoid operating the chainsaw in wet or windy conditions.
  • Do not operate the chainsaw if you are tired, ill, or under the influence of drugs or alcohol.
  • Stop the chainsaw immediately if you experience any unusual vibration.
  • Inspect the chainsaw regularly for damage and make any necessary repairs before using it again.

Before Use

  • Assemble the chainsaw according to the instructions in the manual.
  • Fill the fuel tank with fresh, unleaded gasoline.
  • Apply chain oil to the chain.
  • Adjust the chain tension.
  • Start the chainsaw and let it run for a few minutes to warm up.

Troubleshooting

  • The chainsaw will not start.
    • Check the fuel level.
    • Make sure the choke is in the correct position.
    • Pull the starter rope slowly several times to prime the engine.
    • If the chainsaw still will not start, take it to a qualified service technician.
  • The chainsaw is hard to start.
    • Clean the spark plug.
    • Adjust the carburetor.
    • Take the chainsaw to a qualified service technician.
  • The chain is not cutting properly.
    • Make sure the chain is sharp.
    • Adjust the chain tension.
    • Clean the bar and chain.
  • The chainsaw is overheating.
    • Let the chainsaw cool down.
    • Clean the air filter.
    • Adjust the carburetor.

Maintenance

  • Clean the chainsaw after each use.
  • Sharpen the chain regularly.
  • Replace the air filter every year.
  • Replace the spark plug every year or 250 hours of use, whichever comes first.
  • Have the chainsaw serviced by a qualified service technician every year.

Warranty

This chainsaw is covered by a one-year warranty against defects in materials and workmanship. If the chainsaw fails within one year of purchase, it will be repaired or replaced free of charge.

Contact Information

Poulan Pro

1901 S. 108th Street

Milwaukee, WI 53214

Phone: 1-800-423-6259

Website: www.poulanpro.com

Additional Information

  • For more information about this chainsaw, please visit the Poulan Pro website or contact customer service.
  • Always follow the manufacturer's instructions when operating this chainsaw.
  • By following these safety precautions, you can help prevent accidents and injuries.

Comments

Post a Comment

Popular posts from this blog

Unraveling Bosch Get 55-125 Professional: From Full Specifications To Potential Issues

Image
Bosch GET 55-125 Professional Information The Bosch GET 55-125 Professional is a corded random orbital sander that is designed for professional use. It features a powerful 550-watt motor that provides a high removal rate, as well as a comfortable grip and a multi-hole sanding pad that helps to improve dust collection. Specifications Motor: 550 watts Orbit: 3.2 mm Speed: 12,000-16,000 OPM Dust collection: 90% Weight: 2.1 kg Features
Read more

Dsc Ss-102 Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
DSC SS-102 Information Introduction The DSC SS-102 is an electronic shock sensor that is designed to detect and alarm on attempts to break into a building or other protected area. The sensor is capable of detecting both minor and major vibrations, and it can be configured to monitor for a preset number of vibrations before it alarms. The SS-102 also features a unique bi-colored LED that indicates the severity of an attack, as well as full anti-tamper protection. Image
Read more

Hitachi N5008ac Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Hitachi N5008AC Information the information about the Hitachi N5008AC staple gun: Introduction The Hitachi N5008AC is a 7/16-inch standard crown stapler that is ideal for construction work, such as wall sheathing, roof decking, subflooring, modular home building, wooden box construction, and expendable-pallet manufacturing. It is a durable, lightweight, and well-balanced pneumatic stapler that features a high-capacity magazine, dual firing methods, and adjustable depth of drive.
Read more